Neschen Easy Dot PET L-UV Transparent

The new ultra transparent PVC-free easy dot® 

After the successful launch of easy dot® PET matt L-UV, Neschen now presents the new easy dot® PET transparent L-UV! An environmentally friendly transparent easy dot® film with excellent see-through properties.

Specially developed for use on glass and window surfaces indoors, the highly transparent film also features the proven water-based and solvent-free easy dot® adhesive technology, which ensures easy handling and durability at the same time. 

easy dot® PET transparent L-UV is a printable, ultra transparent self-adhesive PET film. The PVC-free film features the proven easy dot® technology. Therefore, it can be applied without bubbles and removed again if necessary. easy dot® PET transparent L-UV is ideal for smooth substrates indoors.

Because of its crystal-clear transparency, unprinted areas remain absolutely transparent. If required, easy dot® PET transparent L-UV can also be combined with PP matt backing. The white special film serves as a laminate and completely replaces a full-area white print. This saves ink, time and money, making it ideal for environmentally friendly composite applications with transparent media.

Thanks to the higher polymer stiffness, the new easy dot® PET transparent L-UV needs around 25% less material than comparable PVC products to achieve the same haptic, thus significantly reducing end of life waste volumes. 

Order your free sample today to discover all the other advantages over competing products!

  • 75 μm environmentally friendly polyester film
  • PVC-free
  • Transparent with excellent optical clarity
  • Up to 25% less material than PVC film
  • Perfect for kiss cutting without cutting the liner
  • easy dot® adhesive technology for a fast, easy and bubble-free application
  • Very good print quality
  • Very good flatness
  • Perfect for kiss cutting without cutting the liner
  • Removable without residue
  • Especially developed for UV-curable and latex-inks (HP latex certified)
  • Dimensionally stable, exhibits no shrinkage and is scratch-resistant after printing with UV
Carrier
  Film type PET- Film, transparent, glossy, with prime coat
  Thickness [µm] Ca. 75 approx.: 3.0 mil
   Weight [g/m2] Ca. 105
  visible gel particles in principle, the visibility of single gel particles cannot be ruled out
   L*a*b* value in principle, colour deviations cannot be ruled out
Adhesive
  Adhesive type polyacrylate dispersion, dots
  pH-value approx. 7,0
  Adhesive strength [N/25 mm] 10 min: > 0,1 24h: > 0,2 AFERA 4001
Masking
  Type one- sided siliconised PE-paper, white
  Thickness [μm] 155 ± 10 approx. 6.1mil
  Weight [g/m2] 140 ± 7
  Removal force [mN/cm] 40-80 speed 300 mm/min
Others
  Storage conditions 18° - 25°C / 64 - 77°F;
40 - 65% rrelative humidity
  Shelf Life [Years] 1
  Indoor conditions for processing 18° - 25°C / 64 - 77°F
  End-use temperature range: -30°C bis +100°C -22° F to +212° F affixed to aluminium
All tests were performed in accordance with 23/50-2, DIN 50014.
*Finat 14, 6. Ausgabe 2001/ Finat 14, 6th edition 2001